Train GraphicClick on the map to explore geographics
 
I need help
FAQ
Emergency
About .
Travel & transport from BBC stories as at 18:35 28 Mar 2024
- How do I renew my UK passport and what is the 10-year rule?
- Passengers pleaded with knifeman during attack
- Family anger at sentence on fatal crash driver, 19
- Easter travel warning as millions set to hit roads
Read about the forum [here].
Register [here] - it's free.
What do I gain from registering? [here]
 02/06/24 - Summer Timetable starts
17/08/24 - Bus to Imber
27/09/25 - 200 years of passenger trains

On this day
28th Mar (1988)
Formal end to carrying coffins by BR (link)

Train RunningCancelled
16:54 Cardiff Central to London Paddington
17:48 Reading to Gatwick Airport
17:54 Cardiff Central to London Paddington
17:57 London Paddington to Worcester Foregate Street
18:03 London Paddington to Penzance
18:08 London Paddington to Frome
Additional 18:25 Shalford to Reading
18:26 Newbury to Bedwyn
18:36 London Paddington to Plymouth
18:37 Westbury to Swindon
18:51 Filton Abbey Wood to Bristol Temple Meads
18:55 Bedwyn to Newbury
19:23 Reading to Gatwick Airport
19:24 Newbury to Bedwyn
19:29 Gatwick Airport to Reading
19:33 London Paddington to Worcester Shrub Hill
19:55 Bedwyn to Newbury
20:13 Swindon to Westbury
20:16 Frome to Westbury
20:49 Newbury to Bedwyn
20:56 Worcester Foregate Street to London Paddington
21:16 Bedwyn to Newbury
Short Run
15:23 Portsmouth Harbour to Cardiff Central
15:30 Cardiff Central to Portsmouth Harbour
15:42 Exeter St Davids to London Paddington
16:19 Carmarthen to London Paddington
16:23 Portsmouth Harbour to Cardiff Central
16:35 London Paddington to Plymouth
16:50 Plymouth to London Paddington
17:03 London Paddington to Penzance
17:20 Reading to Gatwick Airport
17:30 London Paddington to Taunton
17:30 Warminster to Bristol Temple Meads
17:36 Swindon to Westbury
17:36 London Paddington to Plymouth
17:50 Gloucester to Salisbury
17:59 Gatwick Airport to Reading
18:18 Newbury to London Paddington
18:19 Reading to Gatwick Airport
18:59 Gatwick Airport to Reading
19:06 London Paddington to Bedwyn
20:42 Bedwyn to London Paddington
Delayed
13:59 Cardiff Central to Penzance
14:15 Penzance to London Paddington
15:03 London Paddington to Penzance
16:03 London Paddington to Penzance
Additional 17:17 Exeter St Davids to Penzance
Additional 17:26 Castle Cary to Penzance
17:29 Gatwick Airport to Reading
An additional train service has been planned to operate as shown 18:25 Shalford to Reading
18:29 Gatwick Airport to Reading
19:04 London Paddington to Plymouth
etc
PollsOpen and recent polls
Closed 2024-03-25 Easter Escape - to where?
Abbreviation pageAcronymns and abbreviations
Stn ComparatorStation Comparator
Rail newsNews Now - live rail news feed
Site Style 1 2 3 4
Next departures • Bristol Temple MeadsBath SpaChippenhamSwindonDidcot ParkwayReadingLondon PaddingtonMelksham
Exeter St DavidsTauntonWestburyTrowbridgeBristol ParkwayCardiff CentralOxfordCheltenham SpaBirmingham New Street
March 28, 2024, 18:39:36 *
Welcome, Guest. Please login or register.

Login with username, password and session length
Forgotten your username or password? - get a reminder
Most recently liked subjects
[133] West Wiltshire Bus Changes April 2024
[132] would you like your own LIVE train station departure board?
[53] Return of the BRUTE?
[44] If not HS2 to Manchester, how will traffic be carried?
[41] Infrastructure problems in Thames Valley causing disruption el...
[32] Reversing Beeching - bring heritage and freight lines into the...
 
News: the Great Western Coffee Shop ... keeping you up to date with travel around the South West
 
   Home   Help Search Calendar Login Register  
Pages: [1] 2
  Print  
Author Topic: Slippery Rails - Cotswold Line  (Read 8579 times)
martyjon
Transport Scholar
Hero Member
******
Posts: 1941


View Profile
« on: October 05, 2017, 07:37:22 »

From JourneyCheck - 05 October 2017


Cancellations to services between Worcester Shrub Hill and Moreton-In-Marsh
Due to slippery rails between Worcester Shrub Hill and Moreton-in-Marsh the line towards Oxford is blocked.


Has'nt the leaf buster been out overnight ? Saw one at Bristol Parkway last Friday and thought, 'yes it's that time of year again'.
Logged
ChrisB
Transport Scholar
Hero Member
******
Posts: 12334


View Profile Email
« Reply #1 on: October 05, 2017, 10:29:54 »

Seemed unable to get up the bank at Honeybourne. Indeed, services now running, but not stopping at Honeybourne until at least lunchtime, to give trains more of a run at the bank.

Similar problems between PNZ and PLY» (Plymouth - next trains), with delays of up to 45mins
Logged
grahame
Administrator
Hero Member
*****
Posts: 40690



View Profile WWW Email
« Reply #2 on: October 07, 2017, 06:24:02 »

I had an opportunity to learn a little bit about wheel turning and wheel lathes on Thursday (and see one too) at a depot maintaining a mixed fleet of units (not HSTs (High Speed Train), 16x or 180 units though).  Pertinent to this thread - some units are fitted with anti-slip systems and their wheels are reprofiled reasonably regularly across the year, whereas 153s do not have such a system and come the leaf fall season they become very firm friends of the wheel lathe, visiting in quite often - as this one here was doing.

Not sure if HSTs, 16x and 180 have anti-slip; I suspect not, but I also suspect (in the case of HSTs) that might be one upgrade too far at this stage in their lives. 



Trivia question - why can wheel sizes on a 153 be up to 25mm different from each other on one bogie, but only a tenth of that on the other bogie?

Logged

Coffee Shop Admin, Acting Chair of Melksham Rail User Group, Option 24/7 Melksham Rep
IndustryInsider
Moderator
Hero Member
*****
Posts: 10095


View Profile
« Reply #3 on: October 07, 2017, 09:35:56 »

Not sure if HSTs (High Speed Train), 16x and 180 have anti-slip; I suspect not, but I also suspect (in the case of HSTs) that might be one upgrade too far at this stage in their lives. 

All three do have WSP (Wheel Slip Protection) systems of varying sophistication.
Logged

To view my GWML (Great Western Main Line) Electrification cab video 'before and after' video comparison, as well as other videos of the new layout at Reading and 'before and after' comparisons of the Cotswold Line Redoubling scheme, see: http://www.dailymotion.com/user/IndustryInsider/
JayMac
Data Manager
Hero Member
******
Posts: 18894



View Profile
« Reply #4 on: October 07, 2017, 09:40:37 »

Class 43 HST (High Speed Train) power cars have Wheel Slip/Slide Protection (WSP), a sort of traction control/ABS for trains.

The Mk3 carriage wheelsets, being unpowered, have no such system. These are often subject to wheel flats when braking on less than ideal rail head conditions. This time of year you'll find more than a few HST sets in traffic with at least one flat.

I noticed at least three flats on a GWR (Great Western Railway) set passing me at Dawlish yesterday. Quite a racket from the outside. Inside, the resonance at certain speeds can be headache inducing.
Logged

"Build a man a fire and he'll be warm for the rest of the day. Set a man on fire and he'll be warm for the rest of his life."

- Sir Terry Pratchett.
stuving
Transport Scholar
Hero Member
******
Posts: 7156


View Profile
« Reply #5 on: October 07, 2017, 10:46:10 »

Not sure if HSTs (High Speed Train), 16x and 180 have anti-slip; I suspect not, but I also suspect (in the case of HSTs) that might be one upgrade too far at this stage in their lives. 

All three do have WSP (Wheel Slip Protection) systems of varying sophistication.

The standard rules (GM/RT2461) are really about wheel slide during braking, and the risk of losing detection in track circuits, both of which are safety-critical. Traction sanding to prevent wheel slip is given much lower priority; though a TOC (Train Operating Company) may be very concerned about it. Those rules say sanding should go before the third axle, and be followed by six axles, so don't apply at all to locomotives. Since an HST is a multiple unit in some respects, sanders do appear to be allowed by the rules. However, while manual application is allowed, automatic application based on the detection of wheel-slip is mandated - I'm not sure if HSTs are equipped so as to allow this.

Despite their lack of axles, classes 142 and 153 were given derogations to have sanders, following a couple of accidents and some tests in 2011.
« Last Edit: October 07, 2017, 12:11:02 by stuving » Logged
IndustryInsider
Moderator
Hero Member
*****
Posts: 10095


View Profile
« Reply #6 on: October 07, 2017, 12:06:37 »

No automatic sanding equipment is fitted to HSTs (High Speed Train), the just have the WSP on the power cars which attempts to release the brakes momentarily to stop an all-wheel slide under braking, and under acceleration the engine power is restricted temporarily is slipping is detected.  Both systems work OK, but are by not brilliant in really poor conditions.  There's then the last resort of the jerry can full of sand kept in the power cars for manual application if you've ground to a halt - don't think that has a particularly high success rate either.  The key is to keep the vegetation well cut back, but NR» (Network Rail - home page) have been very poor at doing that of late.
Logged

To view my GWML (Great Western Main Line) Electrification cab video 'before and after' video comparison, as well as other videos of the new layout at Reading and 'before and after' comparisons of the Cotswold Line Redoubling scheme, see: http://www.dailymotion.com/user/IndustryInsider/
Trowres
Transport Scholar
Hero Member
******
Posts: 749


View Profile
« Reply #7 on: October 07, 2017, 21:04:12 »

What happened to the Girling self-powered wheel slide protection that was fitted to HST (High Speed Train) trailer cars?
Logged
Chris from Nailsea
Administrator
Hero Member
*****
Posts: 17865


I am not railway staff


View Profile Email
« Reply #8 on: October 08, 2017, 22:55:53 »

The key is to keep the vegetation well cut back, but NR» (Network Rail - home page) have been very poor at doing that of late.

Agreed - and that's not just on the Cotswold Line.  Angry

Logged

William Huskisson MP (Member of Parliament) was the first person to be killed by a train while crossing the tracks, in 1830.  Many more have died in the same way since then.  Don't take a chance: stop, look, listen.

"Level crossings are safe, unless they are used in an unsafe manner."  Discuss.
Rob on the hill
Hero Member
*****
Posts: 354


View Profile
« Reply #9 on: October 09, 2017, 12:50:10 »

This video has been posted today on the Facebook HST (High Speed Train) Enthusiast page showing mega slippage on Dainton! (Filmed in 2008).
https://www.youtube.com/watch?v=M3CJPgn7moo&feature=share
Logged
johnneyw
Transport Scholar
Hero Member
******
Posts: 2257


From station to station, back to Bristol city....


View Profile
« Reply #10 on: October 09, 2017, 13:46:32 »

This video has been posted today on the Facebook HST (High Speed Train) Enthusiast page showing mega slippage on Dainton! (Filmed in 2008).
https://www.youtube.com/watch?v=M3CJPgn7moo&feature=share

Blinkin' flip!
Logged
chrisr_75
Hero Member
*****
Posts: 1019


View Profile
« Reply #11 on: October 09, 2017, 14:22:32 »

The key is to keep the vegetation well cut back, but NR» (Network Rail - home page) have been very poor at doing that of late.

Agreed - and that's not just on the Cotswold Line.  Angry



I mostly disagree. The key is keeping certain species in check, not the wholesale removal of all lineside vegetation.
Logged
Richard Fairhurst
Global Moderator
Hero Member
*****
Posts: 1204


View Profile Email
« Reply #12 on: October 09, 2017, 20:00:18 »

It's particularly surprising given the wholesale surgery that's been carried out on Campden Bank over the past few years.
Logged
IndustryInsider
Moderator
Hero Member
*****
Posts: 10095


View Profile
« Reply #13 on: October 10, 2017, 09:22:05 »

The key is to keep the vegetation well cut back, but NR» (Network Rail - home page) have been very poor at doing that of late.
Agreed - and that's not just on the Cotswold Line.  Angry

I mostly disagree. The key is keeping certain species in check, not the wholesale removal of all lineside vegetation.

I’m not going to disagree with that, though NR have been very poor at doing that lately, too!

It's particularly surprising given the wholesale surgery that's been carried out on Campden Bank over the past few years.

The area really cut back was the top bit by the tunnel, Campden Bank starts off OK where the old sidings and embankment are but you need to pick up speed there to 30mph or you could well be in trouble, as you then you hit the area beyond Poden Farm Crossing (now closed) and that’s where you start to slip badly and lose speed and you have over a mile until the next really open bit.

If you miss out the Honeybourne stop, you can usually hit the bottom at 75mph which gives you every chance, though you can still lose a large percentage of that if it’s really bad.

I know the tunnel itself has come to the rescue a few times as drivers have been down to less than 5mph before getting back normal traction in the tunnel.  I’ll be interested to see how IET (Intercity Express Train)’s cope with it.
Logged

To view my GWML (Great Western Main Line) Electrification cab video 'before and after' video comparison, as well as other videos of the new layout at Reading and 'before and after' comparisons of the Cotswold Line Redoubling scheme, see: http://www.dailymotion.com/user/IndustryInsider/
stuving
Transport Scholar
Hero Member
******
Posts: 7156


View Profile
« Reply #14 on: October 10, 2017, 10:10:30 »

If you miss out the Honeybourne stop, you can usually hit the bottom at 75mph which gives you every chance, though you can still lose a large percentage of that if it’s really bad.

Of course the speed lost and the height gained both affect total energy, with an equivalence that's not hard to work out (basic school applied maths). However, I don't recall coming across the numbers as a simple rule of thumb. Maybe that's because I've never needed to know in that way - do train drivers (like artillery officers) maybe have a version of this?  Or is it just experience (i.e. what happened over last year and many before)?

Anyway, it works out that 100 m of height converts to 100 mi/hr. It's the square of velocity that matters, so 50 mi/hr converts to only 25 m of height. For anyone more modern, 100 km/hr gives 40 m, so 200 km/hr gives 160 m. Or, for anyone less modern, 120 ft of height gives 60 mi/hr, and 160 ft > 70 mi/hr.

But that's only one factor in "will we make it up the hill?". You have to add the effects of traction from whatever adhesion there is and subtract drag from all causes.

PS: Campden bank looks to be a bit less than 100 m vertically from Honeybourne, rather less for the steep bit wherever you think that starts.
 
« Last Edit: October 10, 2017, 10:16:18 by stuving » Logged
Do you have something you would like to add to this thread, or would you like to raise a new question at the Coffee Shop? Please [register] (it is free) if you have not done so before, or login (at the top of this page) if you already have an account - we would love to read what you have to say!

You can find out more about how this forum works [here] - that will link you to a copy of the forum agreement that you can read before you join, and tell you very much more about how we operate. We are an independent forum, provided and run by customers of Great Western Railway, for customers of Great Western Railway and we welcome railway professionals as members too, in either a personal or official capacity. Views expressed in posts are not necessarily the views of the operators of the forum.

As well as posting messages onto existing threads, and starting new subjects, members can communicate with each other through personal messages if they wish. And once members have made a certain number of posts, they will automatically be admitted to the "frequent posters club", where subjects not-for-public-domain are discussed; anything from the occasional rant to meetups we may be having ...

 
Pages: [1] 2
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.2 | SMF © 2006-2007, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
This forum is provided by customers of Great Western Railway (formerly First Great Western), and the views expressed are those of the individual posters concerned. Visit www.gwr.com for the official Great Western Railway website. Please contact the administrators of this site if you feel that the content provided by one of our posters contravenes our posting rules (email link to report). Forum hosted by Well House Consultants

Jump to top of pageJump to Forum Home Page