Train GraphicClick on the map to explore geographics
 
I need help
FAQ
Emergency
About .
Travel & transport from BBC stories as at 19:35 28 Mar 2024
* Easter getaways hit by travel disruption
- How do I renew my UK passport and what is the 10-year rule?
- Passengers pleaded with knifeman during attack
- Family anger at sentence on fatal crash driver, 19
- Easter travel warning as millions set to hit roads
Read about the forum [here].
Register [here] - it's free.
What do I gain from registering? [here]
 02/06/24 - Summer Timetable starts
17/08/24 - Bus to Imber
27/09/25 - 200 years of passenger trains

On this day
28th Mar (1988)
Woman found murdered on Orpington to London train (*)

Train RunningCancelled
17:54 Cardiff Central to London Paddington
17:57 London Paddington to Worcester Foregate Street
18:03 London Paddington to Penzance
18:08 London Paddington to Frome
18:36 London Paddington to Plymouth
19:23 Reading to Gatwick Airport
19:24 Newbury to Bedwyn
19:33 London Paddington to Worcester Shrub Hill
19:35 Exeter St Davids to London Paddington
19:55 Bedwyn to Newbury
20:13 Swindon to Westbury
20:16 Frome to Westbury
20:49 Newbury to Bedwyn
20:56 Worcester Foregate Street to London Paddington
21:16 Bedwyn to Newbury
21:53 Newbury to Bedwyn
22:25 Bedwyn to Newbury
22:47 Newbury to Bedwyn
Short Run
15:03 London Paddington to Penzance
16:19 Carmarthen to London Paddington
16:23 Portsmouth Harbour to Cardiff Central
16:35 London Paddington to Plymouth
16:50 Plymouth to London Paddington
17:03 London Paddington to Penzance
17:30 London Paddington to Taunton
17:36 London Paddington to Plymouth
17:50 Gloucester to Salisbury
17:59 Gatwick Airport to Reading
18:19 Reading to Gatwick Airport
18:29 Gatwick Airport to Reading
18:54 Reading to Gatwick Airport
18:59 Gatwick Airport to Reading
19:04 Paignton to London Paddington
19:06 London Paddington to Bedwyn
19:13 Salisbury to Bristol Temple Meads
19:29 Gatwick Airport to Reading
20:03 London Paddington to Plymouth
20:42 Bedwyn to London Paddington
21:04 London Paddington to Plymouth
Delayed
13:59 Cardiff Central to Penzance
14:15 Penzance to London Paddington
16:03 London Paddington to Penzance
16:15 Penzance to London Paddington
Additional 17:17 Exeter St Davids to Penzance
Additional 17:26 Castle Cary to Penzance
19:04 London Paddington to Plymouth
19:54 Reading to Gatwick Airport
19:59 Gatwick Airport to Reading
23:04 Reading to Bedwyn
PollsOpen and recent polls
Closed 2024-03-25 Easter Escape - to where?
Abbreviation pageAcronymns and abbreviations
Stn ComparatorStation Comparator
Rail newsNews Now - live rail news feed
Site Style 1 2 3 4
Next departures • Bristol Temple MeadsBath SpaChippenhamSwindonDidcot ParkwayReadingLondon PaddingtonMelksham
Exeter St DavidsTauntonWestburyTrowbridgeBristol ParkwayCardiff CentralOxfordCheltenham SpaBirmingham New Street
March 28, 2024, 19:43:02 *
Welcome, Guest. Please login or register.

Login with username, password and session length
Forgotten your username or password? - get a reminder
Most recently liked subjects
[133] West Wiltshire Bus Changes April 2024
[132] would you like your own LIVE train station departure board?
[53] Return of the BRUTE?
[44] If not HS2 to Manchester, how will traffic be carried?
[41] Infrastructure problems in Thames Valley causing disruption el...
[32] Reversing Beeching - bring heritage and freight lines into the...
 
News: the Great Western Coffee Shop ... keeping you up to date with travel around the South West
 
   Home   Help Search Calendar Login Register  
Pages: [1]
  Print  
Author Topic: Train hits debris on tracks near Melksham, bridge not damaged, says Network Rail  (Read 2830 times)
grahame
Administrator
Hero Member
*****
Posts: 40690



View Profile WWW Email
« on: March 09, 2020, 20:50:17 »

From the Wiltshire Times

Quote
A railway bridge between Chippenham and Melksham 'collapsed' as a train went over it, according to the driver.

The train from Swindon to Warminster went over it at 6.20pm.

Reporter Elly Roberts was on board. She said: “It just felt like the train was changing tracks at first. Then it started to sway a bit and loud crunching could be heard.
 
“Passengers originally thought the train had gone over a tree.

"Some people were worried and said they had to hold on to the arm rests.

“But it was all over so fast, in less than five seconds.

"I’m just so grateful nothing worse happened.”

The driver told passengers the bridge had collapsed and caused “substantial damage” to the train.

The front carriage engine was 'completely damaged'.

The rear carriage is still intact.

Network Rail said the train had broken down near the Wiltshire station. It was thought the train had hit something on the track, possibly debris from a nearby railway bridge.

Engineers are currently examining the bridge for any signs of damage.

Network Rail said the Dunch Lane bridge had not collapsed.
Logged

Coffee Shop Admin, Acting Chair of Melksham Rail User Group, Option 24/7 Melksham Rep
grahame
Administrator
Hero Member
*****
Posts: 40690



View Profile WWW Email
« Reply #1 on: March 18, 2020, 21:33:41 »

I took a stroll up to Dunch Lane where a vehicle hit the over bridge 9 days ago, and a train then hit the debris on the track.

One of the bridge pillars is missing:


and if you look over the bridge, you can see all the old stone including the pillar top where it has been moved off the track:


Dunch Lane is a very old lane over the railway which rises and falls sharply to the single track bridge, and it's become a bit of a rat run.  Age is seen in some of the very old fencing posts - broad gauge rails:


And here's the Swindon train approaching:


Headed away from the camera towards Swindon.  Note the irony of the diesel powered train going right past the Melksham Electicity SubStation - a rather large distribution point which would have enough "umph" in it to run a main line from Swindon to Bristol, with a side shoot all the the from Thingley to Taunton.:
Logged

Coffee Shop Admin, Acting Chair of Melksham Rail User Group, Option 24/7 Melksham Rep
stuving
Transport Scholar
Hero Member
******
Posts: 7156


View Profile
« Reply #2 on: March 18, 2020, 23:21:51 »

Headed away from the camera towards Swindon.  Note the irony of the diesel powered train going right past the Melksham Electicity SubStation - a rather large distribution point which would have enough "umph" in it to run a main line from Swindon to Bristol, with a side shoot all the the from Thingley to Taunton.:

Why "would"? It's wired up and doing more or less that. OK, some of the wires haven't appeared yet, and Taunton is a bit further than they did in plan A, all of which is a little bit wouldy, but still ...
Logged
grahame
Administrator
Hero Member
*****
Posts: 40690



View Profile WWW Email
« Reply #3 on: March 19, 2020, 06:33:29 »

Headed away from the camera towards Swindon.  Note the irony of the diesel powered train going right past the Melksham Electicity SubStation - a rather large distribution point which would have enough "umph" in it to run a main line from Swindon to Bristol, with a side shoot all the the from Thingley to Taunton.:

Why "would"? It's wired up and doing more or less that. OK, some of the wires haven't appeared yet, and Taunton is a bit further than they did in plan A, all of which is a little bit wouldy, but still ...

It's electrified ... thus far ... Swindon to Cockelbury Lane, on the outskirts of Chippenham which is a locations that's operationally in the middle of no-where. So every train that uses what's been done needs a secondary motive power - be it on board fossil fuel, stored electricity, or something else.

I'm unclear as to whether the feed does come up from Melksham or not to that point.  A lot of work was done burying a puppy [correction - supply  Grin] cable from Melksham to the railway at Thingley and I understand that a cable was to be run along the track through the station and to the end of the overheads.  I don't know if that has been done or not - it it has, a very different scale of engineering to the cross country section from Melksham Substation to Thingley Junction - as different as a 12" water main to a pipe to a domestic shower would be!

My "would" comment related to running train on electricity from Cockelbury Lane through Chippenham, Corsham, Box Tunnel, Bath, Saltford and Keynsham to Bristol.  Also from Thingley, past the source of power at Melksham to Trowbridge, Westbury, Frome, Castle Cary and Taunton.
Logged

Coffee Shop Admin, Acting Chair of Melksham Rail User Group, Option 24/7 Melksham Rep
stuving
Transport Scholar
Hero Member
******
Posts: 7156


View Profile
« Reply #4 on: March 19, 2020, 11:23:44 »

I'm unclear as to whether the feed does come up from Melksham or not to that point.  A lot of work was done burying a puppy [correction - supply  Grin] cable from Melksham to the railway at Thingley and I understand that a cable was to be run along the track through the station and to the end of the overheads.  I don't know if that has been done or not - it it has, a very different scale of engineering to the cross country section from Melksham Substation to Thingley Junction - as different as a 12" water main to a pipe to a domestic shower would be!

Indeed - and it's unclearer than I thought it was. We know there's a National Grid feed at 25/0/25 kV from Melksham GSP to NG (Natural Gas)'s terminating sibstation next door to Thingley ATFS. I've got documents for that, and the scar for the cable is visible on satellite pictures. There's also a shiny new white cable conduit from there along the track towards Chippenham. Unfortunately, from there to Royal Wootton Bassett Junction there's no pictures on Google Earth new enough and clear enough to show anything much. (And I still suspect that GE's offer of pictures changes with time for no obvious reason.)

There was to be an ATFS at Royal Wootton Bassett Junction, too, but it's not listed by NG as being fed by them. I found a newer picture for there (undated), which shows what could be an ATFS but no next-door NG substation, suggesting it cannot have a grid feed. Then I found report (a case study) by BCM Construction (but with NR» (Network Rail - home page)'s logo on it too) saying they have installed an independent feeder cable to feed Thingley Junction ATFS from Royal Wootton Bassett ATFS which has a grid supply. I can only assume that report was company PR (Public Relations) and too little care has been taken over whether it's right about the feed direction.

There is a new conduit all the way - visible on the newer images - put in before most of the OLE (Overhead Line Equipment, more often "OHLE") supports went up, which suggests the feeder does run all the way too. The cable went in in 2016, probably before people were looking for such things, using NR Southern's cable train - though the trench under P1 at Chippenham people did notice. The cable is described as 2x1 core 630 sq mm, which I think could carry roughly 800A and so feed 40 MW; that sounds a bit low for a full ATFS demand.

So, while it's all very confusing, it does look as if power from Melksham feeds in only at RWB ATFS to supply down to short of Chippenham, and an unknown extent along the main line each way. At least, if all those ifs are true!

Logged
Bmblbzzz
Transport Scholar
Hero Member
******
Posts: 4256


View Profile
« Reply #5 on: March 19, 2020, 11:52:38 »

Dunch Lane is a very old lane over the railway which rises and falls sharply to the single track bridge, and it's become a bit of a rat run.  Age is seen in some of the very old fencing posts - broad gauge rails:


Out of curiosity, how can you tell that these are broad gauge rails? To my inexpert eye they're clearly a different shape from modern rails but I didn't even realise that broad gauge had a special rail shape; thought it was just the gauge. Couldn't they have been standard gauge rails (if they had been set horizontally at the required gauge rather than vertically in a fence, etc)? Perhaps Brunel used a special wheel shape?
Intrigued now...
Logged

Waiting at Pilning for the midnight sleeper to Prague.
bradshaw
Transport Scholar
Hero Member
******
Posts: 1450



View Profile
« Reply #6 on: March 19, 2020, 12:37:37 »

They are bridge rails from the broad gauge era. They were laid along baulks of timber to form the line. The gauge was kept by iron bars between the two lines.
As time went by more and more track was converted to cross sleepers.
There were other broad gauge rails. Barlow Rail shown in the picture which had curved flanges. It was often used in sidings, as at Weymouth. The picture show its later use as gateposts at Chippenham. Then there was MacDonnel plates which were used on the Bridport branch. These were laid on the the ballast and the lighter weight bridge rails lay on top. Again metal ties held the gauge. The one in the photo comes from Brian Jackson’s Bridport Branch (first edition)


https://didcotrailwaycentre.org.uk/article.php/20/broad-gauge-railway

http://www.railalbum.co.uk/early-railways/brunel-gwr-broad-gauge.htm
Logged
Do you have something you would like to add to this thread, or would you like to raise a new question at the Coffee Shop? Please [register] (it is free) if you have not done so before, or login (at the top of this page) if you already have an account - we would love to read what you have to say!

You can find out more about how this forum works [here] - that will link you to a copy of the forum agreement that you can read before you join, and tell you very much more about how we operate. We are an independent forum, provided and run by customers of Great Western Railway, for customers of Great Western Railway and we welcome railway professionals as members too, in either a personal or official capacity. Views expressed in posts are not necessarily the views of the operators of the forum.

As well as posting messages onto existing threads, and starting new subjects, members can communicate with each other through personal messages if they wish. And once members have made a certain number of posts, they will automatically be admitted to the "frequent posters club", where subjects not-for-public-domain are discussed; anything from the occasional rant to meetups we may be having ...

 
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.2 | SMF © 2006-2007, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
This forum is provided by customers of Great Western Railway (formerly First Great Western), and the views expressed are those of the individual posters concerned. Visit www.gwr.com for the official Great Western Railway website. Please contact the administrators of this site if you feel that the content provided by one of our posters contravenes our posting rules (email link to report). Forum hosted by Well House Consultants

Jump to top of pageJump to Forum Home Page