Train GraphicClick on the map to explore geographics
 
I need help
FAQ
Emergency
About .
Travel & transport from BBC stories as at 21:15 28 Mar 2024
* Bus plunges off South Africa bridge, killing 45
- Easter getaways hit by travel disruption
- Where Baltimore bridge investigation goes now
- How do I renew my UK passport and what is the 10-year rule?
- Family anger at sentence on fatal crash driver, 19
- Easter travel warning as millions set to hit roads
Read about the forum [here].
Register [here] - it's free.
What do I gain from registering? [here]
 02/06/24 - Summer Timetable starts
17/08/24 - Bus to Imber
27/09/25 - 200 years of passenger trains

On this day
28th Mar (1917)
Bideford, Westward Ho! and Appledore closed (link)

Train RunningCancelled
18:30 Cardiff Central to Portsmouth Harbour
18:36 London Paddington to Plymouth
19:33 London Paddington to Worcester Shrub Hill
19:35 Exeter St Davids to London Paddington
19:59 Gatwick Airport to Reading
20:29 Gatwick Airport to Reading
20:54 Reading to Gatwick Airport
20:56 Worcester Foregate Street to London Paddington
21:16 Bedwyn to Newbury
21:30 Shalford to Reading
21:53 Newbury to Bedwyn
22:25 Bedwyn to Newbury
22:30 Gatwick Airport to Reading
22:47 Newbury to Bedwyn
Short Run
16:03 London Paddington to Penzance
17:03 London Paddington to Penzance
17:30 London Paddington to Taunton
17:36 London Paddington to Plymouth
18:03 London Paddington to Penzance
19:04 Paignton to London Paddington
20:03 London Paddington to Plymouth
20:11 Salisbury to Bristol Temple Meads
20:42 Bedwyn to London Paddington
21:04 London Paddington to Plymouth
23:04 Reading to Bedwyn
23:17 Bedwyn to Reading
Delayed
16:15 Penzance to London Paddington
Additional 17:26 Castle Cary to Penzance
19:04 London Paddington to Plymouth
21:30 Gatwick Airport to Reading
23:45 London Paddington to Penzance
PollsOpen and recent polls
Closed 2024-03-25 Easter Escape - to where?
Abbreviation pageAcronymns and abbreviations
Stn ComparatorStation Comparator
Rail newsNews Now - live rail news feed
Site Style 1 2 3 4
Next departures • Bristol Temple MeadsBath SpaChippenhamSwindonDidcot ParkwayReadingLondon PaddingtonMelksham
Exeter St DavidsTauntonWestburyTrowbridgeBristol ParkwayCardiff CentralOxfordCheltenham SpaBirmingham New Street
March 28, 2024, 21:32:22 *
Welcome, Guest. Please login or register.

Login with username, password and session length
Forgotten your username or password? - get a reminder
Most recently liked subjects
[104] West Wiltshire Bus Changes April 2024
[103] would you like your own LIVE train station departure board?
[78] Infrastructure problems in Thames Valley causing disruption el...
[56] If not HS2 to Manchester, how will traffic be carried?
[41] Return of the BRUTE?
[25] Reversing Beeching - bring heritage and freight lines into the...
 
News: the Great Western Coffee Shop ... keeping you up to date with travel around the South West
 
   Home   Help Search Calendar Login Register  
Pages: [1]
  Print  
Author Topic: Derailment at Dalwhinne  (Read 2155 times)
eightf48544
Transport Scholar
Hero Member
******
Posts: 4574


View Profile Email
« on: April 19, 2021, 10:25:29 »

This one seems to have slipped past.

https://www.bbc.co.uk/news/uk-scotland-highlands-islands-56711543

Seems they were doing somekind of tests with a short High Speed Train (HST (High Speed Train)).

Edit:VickiS - Clarifying Acronym
« Last Edit: April 27, 2021, 09:30:10 by VickiS » Logged
bradshaw
Transport Scholar
Hero Member
******
Posts: 1450



View Profile
« Reply #1 on: April 19, 2021, 11:20:50 »

This is a thread on Twitter about it.

https://twitter.com/timonfrancis/status/1380936790715084801?s=21
Logged
grahame
Administrator
Hero Member
*****
Posts: 40690



View Profile WWW Email
« Reply #2 on: April 23, 2021, 20:02:13 »

From The Scotsman

RAIB (Rail Accident Investigation Branch) interim report - double line section, train signalled straight ahead but points set to 15 m.p.h. crossover. Going 30 m.p.h. ... could have been much faster; thank goodness it wasn't.  Next step - finding out why the points were wrong.   Suggestion also that signalman's systems showed train routed and signalled straight through.
Logged

Coffee Shop Admin, Acting Chair of Melksham Rail User Group, Option 24/7 Melksham Rep
Oxonhutch
Transport Scholar
Hero Member
******
Posts: 1243



View Profile
« Reply #3 on: April 23, 2021, 22:42:24 »

Suggestion also that signalman's systems showed train routed and signalled straight through.

As an amateur S+T, that would be very disturbing - a wrong side failure.
Logged
stuving
Transport Scholar
Hero Member
******
Posts: 7156


View Profile
« Reply #4 on: April 23, 2021, 23:55:21 »

Suggestion also that signalman's systems showed train routed and signalled straight through.

As an amateur S+T, that would be very disturbing - a wrong side failure.

it's a bit more complicated than that. If you look at the RAIB (Rail Accident Investigation Branch) words, the only valid route for this train in the Up direction was the Up line - the crossover was only available in the Down direction. So how is that directional protection implemented in a basically mechanical box (though this crossover is motor driven)?
Quote
The signal on the approach to the crossover was displaying a proceed indication for the route along the up line and there is no signalled route from there, over the crossover, to the down line. Both sets of points forming the crossover were detected as being in the correct position for the up-line route by the signalling system and were indicated as such to the signaller, even though the points at the north end of the crossover (the end nearest Dalwhinnie station) were set in a position to divert the train onto the crossover.
Logged
grahame
Administrator
Hero Member
*****
Posts: 40690



View Profile WWW Email
« Reply #5 on: April 24, 2021, 04:21:36 »

Suggestion also that signalman's systems showed train routed and signalled straight through.

As an amateur S+T, that would be very disturbing - a wrong side failure.

it's a bit more complicated than that. If you look at the RAIB (Rail Accident Investigation Branch) words, the only valid route for this train in the Up direction was the Up line - the crossover was only available in the Down direction.

Agreed on the complexity.  Still a very, very disturbing.  I would hope that the full / next layer of the investigation will get to the bottom of what happened; usually these investigations do that.  And from that, lessons learned and from those lessons, changes / updates so that our railways become even safer.
Logged

Coffee Shop Admin, Acting Chair of Melksham Rail User Group, Option 24/7 Melksham Rep
Oxonhutch
Transport Scholar
Hero Member
******
Posts: 1243



View Profile
« Reply #6 on: April 24, 2021, 08:54:09 »

it's a bit more complicated than that. If you look at the RAIB (Rail Accident Investigation Branch) words, the only valid route for this train in the Up direction was the Up line - the crossover was only available in the Down direction. So how is that directional protection implemented in a basically mechanical box (though this crossover is motor driven)?

I agree that it will be complicated, and I made my 'wrong-side failure' comment before finding and reading the govt news report;

Wherein it writes:

Quote

Why the signalling system did not detect that the points were in an incorrect position thereby allowing the signal to be cleared for the movement along the up line


That is a classic wrong-sider when the interlocking fails to detect such a configuration. I will be interested too see the full report with diagrams, interlocking tables, photos and a detailed explanation of events that led up to this incident.
Logged
eightf48544
Transport Scholar
Hero Member
******
Posts: 4574


View Profile Email
« Reply #7 on: April 26, 2021, 10:59:43 »

Interesting part of the RAIB (Rail Accident Investigation Branch) investigation.

"How the points were able to move as the train passed over"

Shades of West Ealing and Potters Bar.
Logged
grahame
Administrator
Hero Member
*****
Posts: 40690



View Profile WWW Email
« Reply #8 on: September 26, 2022, 16:27:07 »

From the BBC» (British Broadcasting Corporation - home page) - https://www.bbc.co.uk/news/articles/cgl044x0m3eo

Quote
A train derailed in the Highlands after it was wrongly diverted from one line to another.

The train was being used for tests at station platforms when its three rear bogies came off the line at Dalwhinnie, at about 03:00 on 10 April last year.

The five people on board were not injured.

In a new report, the Rail Accident Investigating Branch (RAIB (Rail Accident Investigation Branch)) said the accident was caused by a wiring error that resulted in a failure of a signalling system.

Investigators said it was fortunate the incident had not been more serious.

Andrew Hall, chief inspector of rail accidents, said the signalling system did not detect that some points on the railway line were in an unsafe position.

He said: “Some of the causes of the accident at Dalwhinnie bear an alarming similarity to those found in the multi-fatal accident at Clapham Junction in 1988, and the more recent collision at Waterloo in 2017 which caused huge disruption on routes into London."
Logged

Coffee Shop Admin, Acting Chair of Melksham Rail User Group, Option 24/7 Melksham Rep
stuving
Transport Scholar
Hero Member
******
Posts: 7156


View Profile
« Reply #9 on: September 26, 2022, 19:04:15 »

I'm a bit surprised by the lack of emphasis on this one of the identified causes:
Quote
Out-of-correspondence testing
136 The maintenance tester did not complete the specified out-of-correspondence testing following installation of the reserviced point machine.

[Out-of-correspondence testing, for this crossover, involves (at least) manually placing the points in all four positions, and the control lever in each position, and testing which of those eights states result in correct detection. It is the final back-up to every other check during the preparation and work.]

The corresponding recommendation is:
Quote
5 The intent of this recommendation is to reduce the likelihood of essential signal maintenance testing tasks being overlooked and not completed.

Network Rail should review its arrangements for recording progress when carrying out testing defined in its signal maintenance testing handbook. This should take into account environmental and other challenges relevant to the workplace and make enhancements that ensure practical contemporaneous recording of:
• the completion of each test step
• relevant test results, measurements, and findings (paragraph 177c.ii
and 177d).

However, I suspect this one may be more important:
Quote
4 The intent of this recommendation is to ensure that, when signalling maintenance teams make engineering changes to the signalling infrastructure, the requirement for the maintenance tester to be independent of the installers is effective in assuring the integrity of the signalling system.

Network Rail should review how it can best achieve the required level of independence between the installation and testing roles when pre-planned renewal work is carried out under the processes described in its signal maintenance testing handbook. This should take into account how people undertaking these roles work currently. It should make enhancements so that practical working arrangements are defined.

This recommendation may be relevant to other types of signalling work undertaken under arrangements described in Network Rail’s signal maintenance test handbook (paragraphs 177b.i, 177b.ii, 177c.i, 177c.iii and 178).

The issue is how you get two people working together in a small team to genuinely check each others' work, and challenge anything that seems to be missing or wrong. It's similar to the long-standing issue of making voice communications include formalities like "repeat back" - it feels awkward among friends.
Logged
GBM
Transport Scholar
Hero Member
******
Posts: 1468


View Profile Email
« Reply #10 on: September 27, 2022, 06:31:22 »

I'm a bit surprised by the lack of emphasis on this one of the identified causes:

However, I suspect this one may be more important:
Quote
4 The intent of this recommendation is to ensure that, when signalling maintenance teams make engineering changes to the signalling infrastructure, the requirement for the maintenance tester to be independent of the installers is effective in assuring the integrity of the signalling system.

Network Rail should review how it can best achieve the required level of independence between the installation and testing roles when pre-planned renewal work is carried out under the processes described in its signal maintenance testing handbook.
The issue is how you get two people working together in a small team to genuinely check each others' work, and challenge anything that seems to be missing or wrong. It's similar to the long-standing issue of making voice communications include formalities like "repeat back" - it feels awkward among friends.

Shudder. Smacks of privatisation, and that to me is not good.
A race to the bottom with private companies undercutting each other to offer a cheaper service
Logged

Personal opinion only.  Writings not representative of any union, collective, management or employer. (Think that absolves me...........)
stuving
Transport Scholar
Hero Member
******
Posts: 7156


View Profile
« Reply #11 on: September 29, 2022, 19:25:24 »

One of the previous reports referred to in this RAIB (Rail Accident Investigation Branch) report was report 04/2010, "Incident at Greenhill Upper Junction, 22 March 2009". That incident was strikingly similar to the one at Dalwhinnie. In both, a replacement point motor was installed in a set with collective detection, but was configured with internal links to suit it for use alone or in a different position in such a set.

Both times there were shortcomings in the preparation and record keeping, and most importantly both times the out-of-correspondence testing was botched. At Greenhill the team did at least do the full set of tests (as far as the incomplete records show) - but the incorrect behaviour of the relay and panel indicator was not seen.

In the Greenhill case the four-man team were all from one local contractor, rather than all from Network Rail as at Dalwhinnie.
Logged
Do you have something you would like to add to this thread, or would you like to raise a new question at the Coffee Shop? Please [register] (it is free) if you have not done so before, or login (at the top of this page) if you already have an account - we would love to read what you have to say!

You can find out more about how this forum works [here] - that will link you to a copy of the forum agreement that you can read before you join, and tell you very much more about how we operate. We are an independent forum, provided and run by customers of Great Western Railway, for customers of Great Western Railway and we welcome railway professionals as members too, in either a personal or official capacity. Views expressed in posts are not necessarily the views of the operators of the forum.

As well as posting messages onto existing threads, and starting new subjects, members can communicate with each other through personal messages if they wish. And once members have made a certain number of posts, they will automatically be admitted to the "frequent posters club", where subjects not-for-public-domain are discussed; anything from the occasional rant to meetups we may be having ...

 
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.2 | SMF © 2006-2007, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
This forum is provided by customers of Great Western Railway (formerly First Great Western), and the views expressed are those of the individual posters concerned. Visit www.gwr.com for the official Great Western Railway website. Please contact the administrators of this site if you feel that the content provided by one of our posters contravenes our posting rules (email link to report). Forum hosted by Well House Consultants

Jump to top of pageJump to Forum Home Page